Products

BC30/BC45 Hot Mounting Machines

BC series mounting press is used to reshape irregular shape and size of metallographic sample which is difficult to hold so as to cut or polish the samples, then be tested and measured in metallographic photo or hardness test. This machine is controlled by digital temperature controller and timer, after finishing mounting, it will turn off automatically. It is the ideal equipment in the institutions, university and industrial’s laboratory

Standart Delivery;

Mounting Press

Brush

Funnel
Wooden Case

 

ID	Product Name	Sample Diameter	Heater
BC30	Manual Mounting Press	30mm	650W/220V
BC45	Manual Mounting Press	45mm	650W/220V

1.The temperature of surrounding medium can not be less than 10 °C and more than 40 °C；

2.The relative humidity of air should be no more than 85% (20 °C)；

3.There should be no obvious vibration source around；

4.There should be no current conducting dust, explosive and corrosive air.

Polishing Machines

Polishing Machines

Auto Polishing Machines

Consumables

Hot Mounting Press

Hot Mounting Pres

Auto-cooling Hot Mounting Pres

Force Testing Machines

Spring Force Tester

Motorise Test Stand

Manual Test Stands

Charpy Impact Tester

Spring Force Tester

Motorise Test Stand

Manual Test Stands

Stands

Spring Force Tester

Motorise Test Stand

Manual Test Stands